Table of Contents
Advertisement
Message
Details and responses
The file is read only and cannot be erased.
File Protected
No SD card is loaded in the unit. Insert a recordable SD card.
No Card
There is no file that can be played back. The file might be damaged.
No PB File
There is no playback file, so DIVIDE cannot be executed.
No MUSIC File
You cannot overdub when there are two 96kHz WAV/BWF or MP3 format playback files.
Cannot overdub!
See REC setting
Mix them down to one file before overdubbing.
The MS decoder is being used on the input. To use it on monitoring, on the REC MODE screen, set MS
Using by Input
DECODE to OFF.
To change the LEVEL MODE function when in dual recording mode, use the REC MODE screen.
Now DUAL REC
The MS decoder cannot be used in overdubbing mode.
Now OVERDUB
Virtual files cannot be played back or added to playlists.
Virtual File!
To play the file back use FILE SWAP.
Can't File Swap
FILE SWAP cannot be used with projects that have only one file.
When auto-recording is enabled, the Self Timer does not function. Set AUTO REC to OFF on the REC
Now Auto Rec
SETTING screen.
Not Continued
File Error
Can't Save Data
If any of these errors occurs, turn the unit's power off and restart it.
Player Error
If the power cannot be turned off, remove the batteries, disconnect the TASCAM PS-P520E AC adapter
(sold separately), and/or disconnect the USB cable for bus power supply.
Device Error
If these error messages continue to appear frequently, please contact the store where you purchased
Writing Failed
this unit or TASCAM customer support service.
Sys Rom Err
System Err XX
(XX is a number.)
15 – Messages
75
TASCAM DR-40X
Advertisement
Table of Contents
