Table of Contents
Advertisement
8 – Mark functions
Adding marks manually
When playing, recording or recording is paused, press the
ENTER/MARK button to add a mark at the current point.
When a mark is added, a pull-up appears at the bottom of the
display.
NOTE
i Mark information is stored in each file with numbers from
01 to 99.
i As the unit is compatible with the BWF format for WAV
files, marks added to a WAV file during recording are
stored in the file. Marks stored in the file are available
when playing back the file using a BWF compliant
software, etc.
i When using the built-in mics, the sound of pressing the
button when adding a mark could be recorded. To avoid
this, use a remote control to add marks.
Adding marks automatically to a
recording
This function allows the unit to add marks automatically
using AUTO REC.
On the REC SETTING screen, set the AUTO REC section MODE
item to MARK.
For details, see "Using the automatic recording function
(AUTO REC)" on page 35.
Moving to mark positions
When stopped, paused or playing back, press the . or
/ button while pressing the ENTER/MARK to move
between marks set in the selected file.
You can use this function like an index for cueing.
NOTE
You cannot move to marks in a different file.
60
TASCAM DR-40X
Clearing marks
When stopped or paused, move to a mark, and press the
ENTER/MARK button to clear that mark.
Advertisement
Table of Contents
