GE PFSS9PKY Technical Service Manual page 49

To remove the water valve assembly:
1. Remove the machine compartment cover. (See
Machine Compartment Cover
2. Remove the icemaker inlet tube.
3. Remove the 1/2-in. hex nut from the water
supply tube. Pull out the tube from the icemaker
valve assembly.
4. Disconnect the fl ow meter wire harness.
5. Remove the Phillips-head screw that holds the
water valve in place. Pull the valve assembly
straight out.
Icemaker Inlet Tube
6. Disconnect the water valve wire harness.
7. Remove the dispenser tank water inlet tube
from the water valve assembly.
Disconnect
Dispenser Tank
Inlet Tube
1. Remove the water valve assembly. (See
.)
Disconnect
Hex Nut
– 49 –
To remove the fl ow meter:
.)
Valve Assembly
2. Remove the 4 Phillips-head screws and the
bracket from the water valve.
3. Remove the John Guest clip. Pull the fl ow meter
from the water valve.
Clip
Flow Meter
Flow Meter
Water
Bracket
Hall Sensor
(Continued next page)