Freezer Thermistor
The freezer thermistor is inserted in the thermistor
cover located in the ceiling of the freezer
compartment behind the light. To access the
thermistor, it is necessary to remove the freezer
basket and drawer. (See
Freezer Basket and Drawer
To remove the thermistor cover, insert a fl at blade
screwdriver under the cover and gently pry the
cover from the ceiling.
Thermistor Cover
Thermistor
The thermistor is connected to the refrigerator with
a wire harness.
Disconnect
Fresh Food Evaporator Thermistor
To access the fresh food evaporator thermistor, the
fresh food evaporator cover must be removed. (See
Fresh Food Evaporator Cover
be removed to disconnect the wire harnesses to the
.)
thermistor. (See
Fresh Food Evaporator
The fresh food thermistor is located on the
evaporator inlet tube.
The thermistor wiring is attached to the evaporator
with 2 plastic wire ties and is held to the inlet tube
with a plastic clamp. The 2 tabs on the clamp can be
pried open to release the thermistor.
Tab
Tab
– 32 –
.) The housing cover can
.)
Thermistor
(Continued next page)