GE PFSS9PKY Technical Service Manual page 22

5. Grasp the shelf angle near the bottom and pull it
out and down.
Note: Behind the cover there is a recessed area in
the back wall that houses the evaporator assembly.
The top of the cover is inserted into the top of the
recess and the sides have 6 tabs that lock into the
recess.
Top of Recessed Area
6. Pull the cover out at the bottom and then lower
the cover.
7. Turn the front of the cover towards the icemaker
and disconnect the evaporator fan motor and
fresh food thermistor wire harnesses.
– 22 –
Disconnect
Disconnect