Set up, install, and configure
2
Adjust the guide to match the size of the paper that you are loading.
3
Load a sheet of paper with the printable side faceup.
•
Load letterhead with the printable side faceup and the top edge entering the printer first for one‑sided
printing.
•
Load letterhead with the printable side facedown and the top edge entering the printer last for two‑sided
printing.
•
Load envelope with the flap side down and against the left side of the paper guide.
Warning—Potential Damage: To avoid paper jams, do not force paper into the manual feeder.
Networking
Connecting the printer to a Wi‑Fi network
Using the control panel
1
From the home screen, navigate to:
Settings > Network/Ports > Wireless
For non-touch-screen printer models, press
2
Select Setup On Printer Panel, and then follow the instructions on the display.
Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial
setup.
Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant application from either the
TM
Google Play
store or App Store online store.
2
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Setup Using Mobile App > Continue for Printer ID
For non-touch-screen printer models, press
3
From your mobile device, launch the application, and then accept the Terms of Use.
4
Grant permissions.
5
Tap Start Wi-Fi Setup, and then select the printer.
6
Select a Wi-Fi network, and then enter your credentials.
7
Tap Finish Wi-Fi Setup.
to navigate through the settings.
to navigate through the settings.
31