Ricoh Aficio 400 User Manual page 7

1. Copy tray (option)
2. Main switch
3. Auto response
(human) sensor
4. Platen cover (option)
5. Exposure glass*
6. Front cover
7. Unit for two-sided
copies (Duplex unit)
8. Paper tray
9. Bypass tray
10. Large capacity tray
11. Right cover of
the optional tray unit
12. Key counter holder
13. Operation panel
14. Toner bottle
15. Fusing unit
Completed copies are delivered here. Regarding
the capacity of the tray,
Switches the copier between on and standby con-
ditions.
When someone comes close to the copier, it will
automatically switch from Low Power mode to
standby mode.
Lower this cover over originals for copying.
Position originals here face down for copying.
*After turning off the main switch, the exposure glass might be hot
because of the anticondensation function. This is not a problem.
Open to access the inside of the copier.
Makes two-sided copies.
Holds 500 sheets of copy paper.
Use to copy onto OHP sheets, adhesive labels,
translucent paper, post cards, and non-standard
size paper.
Holds 1,000 sheets of copy paper.
Open to remove misfed paper.
Insert the optional key counter here.
Operator controls and touch panel are located
here. See the next page.
Replace the toner bottle when "
is displayed on the display.
Fuses the copy image to the paper. When ac-
cessing the inside of the copier, use caution.
This unit may be very hot.
COPIER EXTERIOR & INTERIOR
see page 166.
f
Add Toner"
See page 120.
5