Display Assembly - HP Spectre x360 Maintenance And Service Manual

Reverse this procedure to install the audio board.

Display assembly

Description
13.3-in, FHD, AntiGlare, Ultra Slim TouchScreen display assembly with privacy filter
13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly
13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly
13.3-in, UHD, BrightView, Ultra Slim TouchScreen display assembly
13.3-in, UHD, BrightView, Ultra Slim TouchScreen display assembly
13.3-in, FHD, AntiGlare, Ultra Slim TouchScreen display assembly with privacy filter with WWAN
13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly with WWAN
13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly with WWAN
IMPORTANT:
and replacement.
1. Turn off the computer. If you are unsure whether the computer is off/or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Before removing the display assembly, follow these steps:
1. Remove the bottom cover (see
2. Remove the battery (see
3. Remove the TouchPad (see
4. Remove the fans (see
5. Remove the system board (see
Remove the display assembly:
1. Disconnect the left display cable (1), and then disconnect the right display cable (2).
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
TouchPad on page
Fans on page
System board on page
34).
35).
37).
44).
46).
Spare part numbers
L37647-001
L37648-001
L37649-001
L37650-001
L37651-001
L37905-001
L37906-001
L37907-001
Display assembly 51