Touchpad - HP Spectre x360 Maintenance And Service Manual

TouchPad

Description
TouchPad for use in dark ash silver models
TouchPad for use in Poseidon blue models
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Remove the TouchPad cable (1).
2. Remove the three Phillips M1.6×2.0-I screws (2).
3. Remove the TouchPad (3).
To insert the TouchPad, reverse the removal procedures.
Bottom cover on page
Battery on page 35).
34).
Spare part number
L37661-001
L37662-001
TouchPad 37