Run File; Peaktrak Menu Options - Teledyne ACCQPrep HP125 Installation And Operation Manual

ACCQPrep HP125
Section 5 PeakTrak
Default Methods

5.1.3 Run File

5.2 PeakTrak Menu
Options
5-2
unless you select F > S
ILE
If you don't save the method, but later want to reuse the method,
simply open the data file that used the method and extract the
method for reuse. The system uses the method file in the tem-
porary area to direct the system operation after you click the
P button.
LAY
PeakTrak categorizes the method settings as Basic or Advanced.
Basic settings are the frequently used controls accessed through
the M window. Use the M
AIN
advanced settings.
Method files are stored by the system and can be opened for
review, reuse, or modification. To open a method file, use the F
> O menu command. Method files can be transferred to the
PEN
system from an external storage device using the F
M menu command.
ETHOD
Method files use an *.pmtd filename extension.
When PeakTrak is started, the system loads a D
A D M contains Teledyne Isco's recommended basic
EFAULT ETHOD
and advanced settings for the use of a default column (as selected
in the config screen). There can be a D
size and type of column defined in the config window. D
M provide a starting point for your separation or purifi-
ETHODS
cation. From these initial settings, you can perform a purification
run, or you can modify the settings for your next run. Subsequent
runs will use the settings in the active (temporary) window. If
you have modified the settings, you can save the M
for future use.
If you find that the D
starting point for your applications, the D
be changed to meet your specific requirements.
When the system has finished a run, it saves the run data in a
R F . This includes the method parameters used during the
UN ILE
separation (but not a reference to the method name as that
method could have subsequently been edited to different param-
eters), rack and tube information, a pressure trace of system
pressure, spectral data, optionally mass spectrometer data and a
chromatogram containing information from each of the detectors.
You can open and review the R
open a R F , use the F
UN ILE
use an *.run filename extension.
PeakTrak menu options include:
• File
• Method File
• MS
• Tools
• Help
M > and name the method.
AVE ETHOD
E window to access the
ETHOD DITOR
EFAULT
M are not a practical
EFAULT ETHODS
EFAULT
F stored by the system. To
UN ILES
> O menu command. Run files
ILE PEN
ILE
> I
ILE MPORT
M .
EFAULT ETHOD
M for each
ETHOD
EFAULT
F
ETHOD ILE
M can
ETHODS