Importing The Clip For Stinger Transition Effect From The Pc - Datavideo HS-1300 Instruction Manual

Restoring CH6 window for Live or Still mode
If the Clip transition is no longer needed, you may free up the CH6 window for other modes of use such as
Still and Live. Follow the steps outlined below to re-configure the CH6 source.
1. Press the MENU button to open the OSD menu on the Multiview display.
2. Open the User Mems sub menu as shown below.
User Mems
3. Select Delete Clip to clear the clip buffer (CH6).
4. Exit the User Mems sub menu.
5. Enter the Inputs sub menu as shown below.
Inputs
6. Move to the Freeze option and set CH6 to Live or Still.

Importing the Clip for Stinger Transition Effect from the PC

On the HS-1300, you will be able to add a clip between sources. Besides using the existing clips on the
machine, you are also allowed to import your own clip (a series of bmp/png/jpg/pic files) to the HS-1300
from the PC using the Switcher Image Import/Export utility, which can be downloaded from the HS-1300
product page.
 First connect the HS-1300 to a Windows computer using an RJ-45 Ethernet cable.
 Since the HS-1300 has a default IP address of 192.168.100.101 so the computer should be given the
IP settings that match the same IP range as the switcher.
 Turn on the Windows computer and manually set the IP to 192.168.100.X within the Windows
Network and Sharing Centre.
 Now install the Switcher Image Import/Export utility on the computer.
 After the utility is installed, click and open the user interface as shown below.
Load Mem Memory
Save Mem Memory
Load Clip
Thumbnail Clip - 1
Input 1 Black
Input 2 Black
Input 3 Black
Input 4 Black
Freeze 1
4
Crosspoint 1
4
13
13
Load Clip
Thumbnail Clip
Clear Clip Delete Clip
0% White
0% White
0% White
0% White
Still 2
Still 5
Input 1 2
Input 4 5
63
Load
Save
0
Thumbnail Clip + 1
100% Chrom
100% Chrom
100% Chrom
100% Chrom
Live 3
Still 6
Input 2 3
Input 5 6
1.0
1.0
1.0
1.0
Still
Live
Input 3
Input 6