Router Based Dhcp Setup - Datavideo HS-1300 Instruction Manual

Router Based DHCP Setup

The computer software can also access the HS-1300 over an existing TCP/IP LAN type network. In order to
initially set up the HS-1300, you may need the assistance of your local I.T. specialist to help with the
network settings. To help guide you, we have included a simplified network setup example below, further
advice may be available through your dealer locally or your Datavideo regional office.
To create this simple dedicated HS-1300 IP network you will need:
 An IP router which can assign/give IP
addresses.
 Two RJ-45 patch leads.
 Windows 7/8/10 laptop or PC.
 The IP router Administrator login and
password.
 The Datavideo Switcher
Image Import/Export
software.
1. First connect the router to the HS-1300 and the Windows computer using two RJ-45 patch leads.
2. Turn on the Windows computer and set it to DHCP setup within the Windows Network and Sharing
Centre.
3. Now click the Windows start button and run the CMD prompt window.
4. At the command line > : _ type IPCONFIG and press enter.
Instructions
21