Advertisement
ACCESSORIES
Upon completion of the installation or service work, at a minimum, perform a daily safety check in accordance with the minimum inspection guidelines
provided by AAADM. Provide each equipment owner with an owner's manual that includes a daily safety checklist and contains, at a minimum, the
information recommended by AAADM. Offer an information session with the equipment owner explaining how to perform daily inspections and point
out the location of power/operation switches to disable the equipment if a compliance issue is noted. The equipment should be inspected annually in accordance with the
minimum inspection guidelines. A safety check that includes, at a minimum, the items listed on the safety information label must be performed during each service call. If
you are not an AAADM certified inspector, BEA strongly recommends you have an AAADM certified inspector perform an AAADM inspection and place a valid inspection
sticker below the safety information label prior to putting the equipment into operation.
Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: Tech_Services@beainc.com | Tech Docs: www.BEAinc.com
75.5911.02 20180226
PN: 10SSQD
Quick Disconnect
Cable
PN: 10BR3
Interface module
PN: 10REL24V
Isolation Relay
Page 9 of 9
Advertisement
