BEA SPARROW Quick Start Manual

DESCRIPTION
1
2
3
TECHNICAL SPECIFICATIONS
Technology:
Transmitted frequency:
Transmitted radiated power:
Transmitted power density:
Detection mode:
Min. detection speed:
Supply voltage:
Mains frequency:
Max power consumption:
Output:
Max. contact voltage:
Max. contact current:
Max. switching power:
Mounting height:
Degree of protection:
Temperature range:
Dimensions:
Tilt angles:
Material:
Weight:
Cable lenght:
Conformity:
Specifications are subject to changes without prior notice.
* Other use of the device is outside the permitted purpose and can not be guaranteed by the manufacturer.
microwave
24.150 GHz
< 20 dBm EIRP
< 5 mW/cm²
motion
5 cm/s (measured in the sensor axis)
12V to 24V AC ±10%; 12V to 24V DC +30% / -10%
50 to 60 Hz
< 2 W
relay (free of potential change-over contact)
42V AC - 60V DC
1A (resistive)
30W (DC) / 60VA (AC)
from 2 m to 6 m
IP64
from -30 °C to + 60 °C
140 mm (L) x 55 mm (H) x 57 mm (W)
0° to 90° vertical; -120° to +120° lateral
ABS
165 g
10 m
RED 2014/53/EU ; 2011/65/EU
SPARROW
UNIDIRECTIONAL OPENING SENSOR
FOR AUTOMATIC INDUSTRIAL
DOORS*
1. cover
2. main connector
3. radar antenna
4. DIP-switch
5. push buttons
4
5