Charging The Device - Garmin Vivosmart HR Plus Owner's Manual

Charging the Device

This device contains a lithium-ion battery. See
the Important Safety and Product Information
guide in the product box for product warnings
and other important information.
The charging cradle contains a magnet. Under
certain circumstances, magnets may cause
interference with some medical devices,
including pacemakers and insulin pumps. Keep
the charging cradle away from such medical
devices.
The charging cradle contains a magnet. Under
certain circumstances, magnets may cause
damage to some electronic devices, including
hard drives in laptop computers. Use caution
when the charging cradle is near electronic
devices.
To prevent corrosion, thoroughly clean and dry
the contacts and the surrounding area before
charging or connecting to a computer. Refer
to the cleaning instructions in the owner's
manual.Refer to the cleaning instructions in the
appendix.
1 Plug the USB cable into a USB port on your
computer.
2 Align the charger posts with the contacts
on the back of the device, and press the
charger
vívosmart® HR+
WARNING
NOTICE
1
until it clicks.
EN
43