Device Information; Specifications; Charging The Device; Device Care - Garmin VIVOSPORT Owner's Manual

Screen Orientation: Sets the device to display data in
landscape or portrait format.
Time Format: Sets the device to display time in a 12-hour or 24-
hour format.
Timeout: Sets the length of time before the backlight turns off.
NOTE: A longer timeout decreases battery life.
Units: Sets the device to display the distance traveled in
kilometers or miles.
Visible Widgets: Allows you to customize the widgets that
appear on your device.
Which wrist?: Allows you to customize which wrist the device is
worn on.
NOTE: This setting is used for strength training and gestures.
Activity Profile Settings on Garmin Connect
From your Garmin Connect account, select Activity Options,
and select an activity type.
Activity Mode Alerts: Allows you to customize activity mode
alerts, such as your recurring alerts and heart rate alerts. You
can set the device to alert you when your heart rate is above
or below a target zone or custom range. You can select an
existing heart rate zone or define a custom zone.
Auto Lap: Allows your device to mark laps automatically at
every kilometer or mile, based on your preferred unit of
distance (Marking Laps, page
Auto Pause: Allows your device to pause the timer
automatically when you stop moving
Feature, page 4).
Auto Set Detection: Allows your device to start and stop
exercise sets automatically during a strength training activity.
Data Fields: Allows you to customize the data screens that
appear during a timed activity.

Device Information

Specifications

Battery type Rechargeable, built-in lithium-polymer battery
Battery life Up to 7 days in watch mode
Up to 8 hr. in GPS mode
Operating temperature From -20º to 50ºC (from -4º to 122ºF)
range
Charging temperature From 0º to 45ºC (from 32º to 113ºF)
range
Wireless frequency 2.4 GHz @ 1 dBm nominal
Water rating Swim
Viewing Device Information
You can view the unit ID, software version, regulatory
information, and remaining battery percentage.
1
Hold the touchscreen to view the menu.
2
Select > > About.
3
Swipe to view the information.

Charging the Device

This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
1
For more information, go to www.garmin.com/waterrating.
8
4).
(Using the Auto Pause
1
WARNING
NOTICE
computer. Refer to the cleaning instructions
page 8).
1
Plug the small end of the USB cable into the charging port on
your device.
2
Plug the large end of the USB cable into a USB charging
port.
3
Charge the device completely.
Tips for Charging Your Device
• Connect the charger securely to the device to charge it using
the USB cable (Charging the Device, page
You can charge the device by plugging the USB cable into a
Garmin approved AC adapter with a standard wall outlet or a
USB port on your computer. Charging a fully depleted battery
®
takes about one hour.
• View the remaining battery percentage on the device
information screen

Device Care

Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not place in high temperature environments, such as a
clothes dryer.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
(Device Care,
8).
(Viewing Device Information, page
NOTICE
NOTICE
Device Information
8).