Executing The Web Server Reference System; Generating The Bitstream - Xilinx MicroBlaze Spartan-3E 1600E Edition Getting Started

R
5.

Executing the Web Server Reference System

This section details the steps necessary to run the Web server demonstration. A pre-built
bitstream, compiled software application, and MFS image are in the
ready_for_download directory under the project root directory. These files can be used
to run the reference system, or the files can be generated manually. The following steps
include information on how to generate and download the hardware bitstream, create an
MFS image, download and run the Web server software application, and set up both the
Web server and Web client.

Generating the Bitstream

To generate the system netlist and bitstream, follow these steps:
1.
2.
Getting Started with the MicroBlaze Development Kit - Spartan3E 1600E Edition
UG258 (v1.0) June 29, 2006
To view the XilMFS configuration settings, expand the xilmfs menu. The XilMFS
settings are shown in Figure
MFSINIT_IMAGE. This creates a file system based on a pre-loaded memory image.
The base_address field contains the starting address for the file system memory. The
field is set to 0x23000000, which is in DDR memory space. The numbytes field
contains the size of the memory file system.
Open the Web server project in XPS.
Generate the bitstream by selecting Hardware → Generate Bitstream in XPS.
www.xilinx.com
Executing the Web Server Reference System
3-8. Note that the init_type field is set to
Figure 3-8: XilMFS Settings
UG258_03_08_062306
27