Recording Paper Jam - Brother DCP-J4110DW Service Manual

4.2.5 Recording paper jam

Paper jam around the paper tray

User Check
- Check that recording paper is loaded correctly in the paper tray.
- Adjust the paper guide to match the recording paper size.
- Check that the paper shorter than the specified size is not loaded.
- Check thickness of recording paper is within tolerance of each type.
- Check that the number of recording paper loaded in the recording paper tray is within
specified volume.
- Check that the jam clear cover is securely closed.
- Clean the related rollers.
Step
1 Foreign materials in the recording
paper path
2 Bank ASSY out of place
3 Platen foam drift
4 Jam clear cover not mounted in
place
5 CR guide rail not mounted in
place
6 Platen ASSY not mounted in
place
7 Platen spring not mounted in
place
8 Jam clear cover damaged, broken
9 Platen ASSY damaged, broken
10 Registration sensor defective
11 Recording paper tray defective
12 Main PCB defective
Cause
Remove foreign materials.
Set the bank ASSY into place.
Set the platen foam into place.
Set the jam clear cover into place.
Set the CR guide rail into place.
Set the platen ASSY into place.
Set the platen spring into place.
Replace the jam clear cover.
Replace the platen ASSY.
Replace the registration sensor PCB ASSY.
Replace the recording paper tray.
Replace the main PCB ASSY.
2-61
Solution
Confidential