Backlight Mode Setting - Excell 150 Series User Manual

EXCELL PRECISION CO., LTD.

3-1-4 Backlight Mode Setting


The default setting is " AUTO " ( The auto backlight is on)
Auto backlight  When there is weight on the platter (the value is larger than

UNIT
HR
WT
 
P
CS

BH3 Series (02024013)
10 divisions), or when any key is pressed, the backlight is on.
After the weight on the platter keeps under 10 divisions while
no key is pressed, the backlight will be off in about 10
seconds.
P
CS

UNIT
HR
WT


P
CS

UNIT
HR
WT


P
CS
Use the

one from three backlight modes.
Press the
20
UNIT
HR
WT
or the / key to select
 
key to confirm the setting.
 Backlight is off
 Auto backlight
 Backlight is on all the time
ZSME300000289