EXCELL PRECISION CO., LTD.
Chapter 4 Internal Function Setting Mode
1. To access the service mode, set the Mini Jumper SWA1 to the ADJ position (EEPROM
UNLOCK), and switch on the scale, then the display shows
2. The Mini Jumper SWA1 must be set back to the LOCK position when the calibration is
completed.
3. If the Mini Jumper is set back to the LOCK position while calibrating, the scale will leave the
internal function mode.
Press
Press
MODE
When first time adjusting the internal settings, the procedure should be as follow:
→
→
45046
Press
key
MODE
Press
key
MODE
Press
key
MODE
key
MODE
key
→
→
Specification Setting
Weight Calibration
Linearity Calibration
Gravity compensation
Proportional Weight Calibration
Press
HOLD
Press
key
HOLD
Press
key
HOLD
Press
key
HOLD
Press
key
HOLD
27
.
key
ZSME300000343