Hach BODTrak II User Manual page 29

10.To start the test, push
the channel number
applicable to the bottle.
13.Push and hold the
key to start a test. A
graph will be displayed.
Note: To cancel a test push
and hold the OFF key.
Note: There is a built-in
1 hour instrument/sample
equilibration period before
data collection. The display
will show DELAY during this
period.
11.Push the
range selection menu is
shown.
14.Do steps 10 through
ON
13 again to set the test
range and start each of
the 6 channels. It is not
necessary to operate all
6 channels if less than 6
samples are available.
BODTrak™ II procedures
key. The 12.Use the arrow keys to
ON
choose the test range.
Note: Use the left arrow key
for the 0 to 35 and
0 to 70 mg/L ranges. Use
the right arrow key for the
0 to 350 and 0 to 700 mg/L
ranges.
29