Husqvarna R135 Workshop Manual page 55

6
C
A
B
54
Cylinder and piston
D
E
Do a test of the gaskets of the crankcase
and cylinder
1. Assemble the distance piece/heat
shield with 1 screw (A).
2. Attach the seal intake with 2 screws
(B).
3. Attach the sealing plugs (C) to the
distance piece/heat shield.
4. Attach the grommet with 2 screws
(D).
5. Attach the pressure testing tool (E).
6. Connect pressure tester to
the pressure testing tool.
7. Test the pressure at 60 kPa..
In the event of leakage – Lokate the lea-
kage with leakage spray. Replace broken
parts.