Husqvarna R135 Workshop Manual page 39

4
333/335
38
Centrifugal clutch
333/335
Dismantle the vibration element (C)
together with the clamping sleeve for
possible replacement.
Dismantle the circlip and press out the
clutch drum.
Dismantle the circlip and heat the clutch
cover so the bearing can be dismantled.
Remove the 3 screws and lift the con-
336
nection sleeve (B) off of the clutch
housing.
Press the vibration element (C) together
with the clamping sleeve out from the
connection sleeve with the help of a
screwdriver for possible replacement.
Dismantle the circlip using circlip pliers.
Press out the clutch drum using a suita-
ble punch and hammer.
Dismantle the circlip using circlip pliers.
Heat the clutch case to approx. 120°C
using a hot air gun.
Knock the edge of the cover against a
wooden block so the ball-bearing falls
out or use a hammer and punch.