Canadian Standards Association (Csa) Approvals - Emerson Rosemount 3101 Quick Start Manual

September 2018
9.0

Canadian Standards Association (CSA) approvals

Canadian Standards Association (CSA) ordinary location approval
(on the Rosemount 3101 and 3102 only)
G6 Project ID: 02 CSA 1871624
The transmitter has been examined and tested to determine that the design meets basic
electrical, mechanical, and fire protection requirements by CSA, a nationally recognized
testing laboratory as accredited by the Standards Council of Canada (SCC).
Special Condition For Safe Use:
The power for the 3101 and 3102 must be supplied from a Rosemount 3490 Series Control
Unit or a class 2 separate extra-low voltage (SELV) source.
Canadian Standards Association (CSA) intrinsically safe approval
(on the Rosemount 3105 only)
I6 Project ID: 02 CSA 1352094
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D
Zone Marking: Class 1, Zone 0, Ex ia IIC
Temperature Code: T4 (T
Temperature Code: T6 (T
Control Drawing: 71097/1218
Ui = 30 V, li = 120 mA, Pi = 0.82 W, Li = 108 μH, Ci = 0 nF
Canadian Standards Association (CSA) non-incendive approval
(on the Rosemount 3105 only)
I6 Project ID: 02 CSA 1352094
Non-Incendive for Class I, Division 2, Groups A, B, C, and D
Zone Marking: Class I, Zone 2, Ex nL IIC
Temperature Code: T4 (T
Temperature Code: T6 (T
Control Drawing: 71097/1218
Ui = 30 V, li = 120 mA, Pi = 0.82 W, Li = 108 μH, Ci = 0 nF
Note
A safety isolator such as a zener barrier is needed for intrinsic safety.
Potential electrostatic charging hazard

To prevent the risk of electrostatic sparking, the surface of the glass-filled nylon (plastic) enclosure should
only be cleaned with a damp cloth.

Do not directly install in any process where its enclosure might be charged by the rapid flow of
non-conductive media.
= –40 to 60 °C)
a
= –40 to 55 °C)
a
= –40 to 60 °C)
a
= –40 to 55 °C)
a
Quick Start Guide
25