6.4.3
Displaying communication settings
Proceed as follows to display the communication settings:
Select "Diagnostics > Communication" in the navigation.
The web server shows a window with the following contents:
● IP address of the converter
● Name of the station
● Information as to whether the connection between the controller and the converter is active
● The standard telegram
– Table with process data for the transfer direction "controller > converter"
– Table with process data for the transfer direction "converter > controller"
Figure 6-37
SINAMICS S210 servo drive system
Operating Instructions, 01/2019, A5E41702836B AC
Communication settings
Commissioning and diagnostics using the web server
6.4 Diagnostic functions
235