Conventional Oven Operation; Rack Positions; Inserting Racks - Thermador Masterpiece Series Use And Care Manual

Built-in double steam and conventional oven
Hide thumbs Also See for Masterpiece Series:
Table of Contents

Advertisement

Available languages

Available languages

First rinsing cycle
Open the appliance door.
1.
Remove the water tank, rinse thoroughly, fill with water
2.
and reinsert.
Close the appliance door.
3.
Touch the ON l OFF touch button.
4.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.

Conventional Oven Operation

Rack Positions

There are seven positions with position one starting at
the bottom of the oven. Rack positions are called out
throughout the manual to help optimize cooking
performance.

Inserting Racks

CAUTION
9
To avoid burns, place oven racks in desired
positions before turning oven on. Always use
oven mitts when the oven is warm. If a rack must
be moved while the oven is hot, do not let oven
mitts contact hot heating elements.
Use caution when removing oven racks from the
lowest rack position to avoid contact with the hot
oven door.
To avoid possible injury or damage to the
appliance, ensure racks are installed exactly per
installation instructions and not backwards or
upside down.
Second rinsing cycle
Open the appliance door.
1.
Remove the water tank, rinse thoroughly, fill with water
2.
and reinsert.
Close the appliance door.
3.
Touch the ON l OFF touch button.
4.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.
Subsequent Cleaning
Open the appliance door.
1.
Empty water tank, rinse thoroughly then dry.
2.
Switch off the appliance.
3.
Descaling is complete and the appliance is ready for
use again.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
To insert Flat Rack into Oven:
Grasp rack firmly on both sides.
1.
Insert rack (see picture).
2.
Tilt rack up to allow stop into rack guide.
3.
Bring rack to a horizontal position and push the rest of
4.
the way in.
Rack should be straight and flat, not crooked.
To remove Flat Rack from Oven:
Grasp rack firmly on both sides and pull rack toward
1.
you.
When the stop is reached, tilt rack up and pull the rest
2.
of the way out.
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meds302wsProfessional seriesPods302w

Table of Contents