Daily Totalizer (2.16.1.); Running Totalizer (2.16.2.); Totalizer Decimal Position (2.16.3.); Totalizer Multiplier (2.16.4.) - Siemens SITRANS LUT400 Operating Instructions Manual

9.2.16.1

Daily Totalizer (2.16.1.)

Read only. Current daily totalizer value. (Automatically resets daily and can be reset by
user.)
Values
9.2.16.2

Running Totalizer (2.16.2.)

Read only. Current running totalizer value. (Reset only by user.)
Values
9.2.16.3

Totalizer Decimal Position (2.16.3.)

Sets the maximum number of decimal places to be displayed.
Options
9.2.16.4

Totalizer Multiplier (2.16.4.)

Use this feature if the LCD Total increments by an amount that is too large (or too small)..
Options
Enter the factor (powers of 10 only) by which actual flow is divided, prior to display on LCD.
Use a value such that the eight-digit totalizer doesn't roll over between readings.
Example: For an LCD Total display in 1000s of flow units, enter 1000.
238
NO DIGITS
1 DIGIT
* 2 DIGITS
3 DIGITS
.001
.01
.1
* 1
10
100
1000
10,000
100,000
1,000,000
10,000,000
Range: 0.00 to 999999999
Default: 0.00
Range: 0.00 to 999999999
Default: 0.00
no digits after the decimal point
1 digit after the decimal point
2 digit after the decimal point
3 digit after the decimal point
Operating Instructions, 07/2019, A5E33329501-AC
SITRANS LUT400