Removing A Headlamp; Changing A Bulb - Ford ECOSPORT Owner's Manual

E257560
5. Locate the vertical adjuster on each
headlamp. Using a Phillips #2
screwdriver, turn the adjuster either
clockwise or counterclockwise in order
to aim the headlamp.
6. Close the hood and turn off the lamps.
Horizontal Aim Adjustment
Horizontal aim is not required for this
vehicle and is non-adjustable.

REMOVING A HEADLAMP

Open the hood. See Opening and
Closing the Hood (page 144).
EcoSport (CBW) India, Vehicles Built From: 14-08-2017, GN15-19G219-ZCA enIND, Edition date: 201708, First Printing
Maintenance
E246899
Disconnect the electrical connector.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the lower fixing point.

CHANGING A BULB

Note: Switch the lights and the ignition off.
Note: Bulbs become hot when in use. Let
them cool down before you remove them.
Note: Do not touch the bulb glass.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Disconnect the bulb electrical
connectors and remove the covers to gain
access to the bulbs.
155