Switching To Speakerphone; Switching To The Handset; Open Listening; Making Calls - Siemens OptiPoint 410 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
Speaker
Speaker
Speaker
14

Switching to speakerphone

This function is not available with
optiPoint 410 economy.
Precondition: You are making a call with the handset.
t
and Press the speaker key and release, then put the hand-
set down and continue the call.

Switching to the handset

This function is not available with
optiPoint 410 economy.
Precondition: You are on the phone in speakerphone
mode.
n
Lift the handset. Continue the call.

Open listening

You can allow other persons in the room to listen in on
the call. Always inform the other party that you are
switching to the speaker.
Precondition: You are making a call with the handset.
To activate:
Press the key. The lamp lights up.
To deactivate:
Press the key. The lamp goes out.

Making Calls

Dialing with the handset off-hook

n
Lift the handset.
p
Internal: Enter the number.
External: Enter the access code and the number.
The called party is busy or does not answer:
t
Replace the handset.