Last Number Redial; Making A Second Call (Consultation); Alternating Between Two Calls (Toggling) - Siemens OptiPoint 410 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
Last no. redial
p
or
Enter the code!
Consultation?
Release and return?
>
Toggle/Connect?
>
Toggle?
>
Release and return?
Conference?
16

Last number redial

If your telephone is configured for this type of redialing,
each number dialed is saved for possible redialing.
Press the key.
Enter your individual code for Last Number Redial
(if necessary, ask the service personnel).
The other party answers:
n
Lift the handset.
or With the handset on-hook: speakerphone (not available
with optiPoint 410 economy).

Making a second call (consultation)

During a call in progress you can set up a second call,
for example, to obtain information. The first party is
placed on hold.
:
Confirm.
p
Make your call to the second party.
Release the second call – return to the first call:
:
Confirm.

Alternating between two calls (toggling)

Precondition: You have either made a second call (see
above) or taken a waiting call
progress.
To switch to the waiting party:
:
Select and confirm.
:
Select and confirm (used in US).
Release the present call – return to the other call:
:
Select and confirm.
Setting up a conference call:
:
Confirm.
An alerting tone indicates that all three users have been
interconnected to form a conference circuit.
page 38 during a call in