Siemens HiPath Xpressions Unified Messaging User Manual page 219

For internal use only
(c) Sending messages using the broadcast call feature (see Section 3.1.8.2)
The following options are provided. Note: You require special privileges to send messages us-
ing the broadcast call feature.
4 Re-record a message and send it using the broadcast call feature:
* Select a broadcast call list:
# If the entry was incorrect: delete the entered code numbers for the
1 Start/stop recording the broadcast call:
* Activate/broadcast the broadcast call:
0 * Cancel the entire process and return to the main menu:
(d) Scrolling previously sent messages
The following options are available when you are scrolling the outbound journal:
3
3 Pause playback.
* Next message: The selection options available under "Scroll Outbound
4 4 Jump to the start of the message: The selection options available un-
A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual
Mailbox Processing on the Telephone and the Voice Mail Service
Push 4.
Enter the code numbers for the broadcast call list and push the star key
to conclude the entry.
broadcast call list:
Push the pound key. You can resume the entry of the code numbers for
a broadcast call list immediately afterwards.
Once you have entered the distribution list(s), the standard operating
steps for recording and editing your message are now available
(see Section 3.3.2.3, "Default Edit Options").
Push 1.
Push the star key.
Push 0 and then push the star key.
Listen to message:
Push 3.
Push 3.
3 Resume playback: The input options available when listening to
the message are available again.
Push 3.
Journal" are now available.
Push the star key.
der "Scroll Outbound Journal" are now available.
Push 4 twice in quick succession.
Operating your Mailbox using VMS
vms.fm
3-59