Forwarding - Siemens HIPATH 8000 User Manual

Step by step
OK
Normal
Forward all calls
Label
Setting
Save & Exit

Forwarding

S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your service personnel about the current set-
ting).
Confirm to begin programming. The sensor key illumi-
nates continuously.
z You can also configure this setting via the Web interface
page 195.
Select and confirm the option shown to program the
first level for instance.
Select a forwarding type:
• Forward all calls
• Forward no reply
• Forward busy
Select and confirm the function in the context menu.
Select and confirm the option shown if you want to
change the label on the graphic display.
j
Accept or edit the label and confirm.
Select and confirm this option to enter the forwarding
destination.
j
Enter and confirm the phone number of the forwarding
destination.
Select and confirm the option shown.
Programmable sensor keys
75