Key Click - Siemens HIPATH 8000 User Manual

Individual phone configuration
Step by step
Settings
User
Phone

Key click

Volume
Medium
Keys
Keypad only
All keys
Save & Exit
176
Key click
You can select here whether a tone should be heard
when a key is pressed. You can also decide whether
this should apply for all keys or only those on the key-
pad. In addition, you can adjust the tone volume or dis-
able the tone.
z You can also configure this setting via the Web interface
page 195.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Adjusting the volume for the Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume
level. You can also select one of the following three
options:
• Low
• High
• Off (for no click)
Key selection
Select and confirm the option shown.
Select and confirm if the setting is only to apply for the
character input keys.
or
Select and confirm the option shown.
Confirm the option shown.