Performing A Ram Test; Using The Extend-Bootware Menu; Table 9 Basic-Assistant Menu - HP 6125G Release Note

Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Running the backup extended BootWare segment
To bootstrap the system software image with the backup extended BootWare segment, enter 5 in the
BASIC-BOOTWARE menu. For information about backing up the extended BootWare segment, see
"Managing the BootWare
Enter your choice(0-5): 5
Booting Backup Extend BootWare
The Extend BootWare is self-decompressing................
Done!
Accessing the BASIC-ASSISTANT menu
To access the BASIC-ASSISTANT BOOTWARE menu, press Ctrl + U while you are in the
BASIC-BOOTWARE menu.
===========================<BASIC-ASSISTANT MENU>===========================
|<1> RAM Test
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-1):

Table 9 BASIC-ASSISTANT menu

Option
<1> RAM Test
<0> Exit to Main Menu

Performing a RAM test

To perform a RAM test, press Ctrl + T within four seconds after the prompt message " Press Ctrl+T to start
memory test" appears (see

Using the EXTEND-BOOTWARE menu

To access the EXTEND-BOOTWARE menu:
: DDR3 SDRAM
: 1024MB
: 800MHz
: 895KB
: 256MB
: 003
: Ver.B
image."
Task
Perform RAM self-test.
Return to the BASIC-BOOTWARE menu.
"Accessing the BASIC-ASSISTANT
23
menu").
|
|