Service Bulletin
11.
After a couple seconds the firmware update
process will start (Fig. 18). After the update, the
screen will restart.
12.
Once the screen restarts, it will be need to be setup and channel scanned.
Bypassing A Product's PVS Coax Cable
When troubleshooting a PVS issue such as:
•
Poor Picture Quality
•
Some channels missing after channel scan
•
No channels found after channel scan
Bypassing the coax cable inside the cardio machine may be necessary. This is for troubleshooting
purposes only.
1.
Remove the back housing of the screen (Fig. 19)
Fig. 18
Fig. 19
Page 9
637-1401 Rev. B