Advertisement
Service Bulletin
6.
Extract the file named 'fw.spi' to the root directory of the thumb drive.
Note: DO NOT rename the file.
Update the Firmware on the Screen
7.
Remove plastic housing from the back of the screen (Fig. 14) and locate the USB port on the screen (Fig. 15).
Fig. 14
8.
With the screen on, insert the USB thumb drive
into the USB port on the back of the screen.
9.
After a few seconds, the display will ask to update
the 'Boot Loader' (Fig. 8).
10.
Press the volume
once.
Fig. 15
Fig. 16
Fig. 17
Page 8
637-1401 Rev. B
Advertisement
