Advertisement
Service Bulletin
Use an External Power Supply
Use a separate 12 volt DC power supply (Fig. 5). The power supply from the E Series bikes, or TBT's
that have PVS will work as well.
1.
Remove the back housing of the screen (Fig. 6) and disconnect the input AC power (Fig. 7).
Fig. 6
2.
Insert the external power supply into the back of the screen (Fig. 8) and plug it into the wall (Fig. 9).
Warning: the following procedure requires the power to be on.
Please exercise caution when working around live electrical components
Fig. 5
Fig. 7
Page 5
637-1401 Rev. B
Advertisement
