Hardware Information
Allocation of IDE intefaces
The primary IDE port is designed for alternatively installing 2.5" and 3.5" hard
disks. 3.5" drives are connected by means of a 40-pin 2.54 mm pitch connector
and 2.5" drives by means of a 44-pin 2 mm pitch connector. The two connectors
are connected in parallel. The secondary IDE port is intended for the optional
connection of a CD ROM and / or an LS 240 drive. It can be adapted using a
44-pin 2 mm pitch connector. The maximum connection length of the data cables
must not be longer than 40 cm.
7-28
Panel PC 670 Computing Unit, Equipment Manual
Release 04/02