Menü Advanced - Siemens SIMATIC PC 670 Equipment Manual

Release 04/02
5.1.2 Menü Advanced
Menu structure
F1
ESC
Figure 5-9 "Advanced" Menu
Settings of the Advanced menu
Installed O/S
Reset
Configuration
Data
Floppy disk
controller
Local Bus IDE
adapter
Panel PC 670 Computing Unit, Equipment Manual
PhoenixBIOS Setup Utility
Main Advanced Security
Setup Warning
Setting items on this menu to incorrect values may
cause your system to malfunction
COM/LPT Configuration
PCI Configuration
Installed O/S:
Reset Configuration Data:
Floppy disk controller:
Local Bus IDE adapter:
Large Disk Access Mode:
Memory Gap at 15 Mbyte:
Video Adapter Settings
Help Select Item
Exit Select Menu
Plug and Play means that all modules are automatically detected and
installed, providing they support the Plug and Play functionality.
[other] BIOS handles the entire Plug and Play capability, default
configuration
[Win98] The operating system handles some of the
Plug and Play functions
[Yes] means that all previous Plug and Play
are deleted. During the next system booting procedure the
configuration will be started again. The entry is then reset to
[No]. System components that do not support Plug and Play
have to be entered manually.
Enables or disables the floppy-disk controller on the motherboard.
[Primary]
[Secondary]
[Both]
[Disabled]
Configuring the Computing Unit in BIOS Setup
Power Boot Sequence Version
Item Specific Help
Select the operating
system installed
on your system which
you will use most
commonly.
[ Other ]
[ No ]
Note: An incorrect
[Enabled]
setting can cause
some operating
[Both]
systems to display
[DOS]
unexpected behavior.
[Disabled]
+ / – Change Values F9
Select
Enter
Sub-Menu F10
One IDE interface for max. two drives.
Two IDE interfaces for max. four drives.
No local IDE interface.
Exit
Setup Defaults
Save and Exit
5-15