Siemens SIMATIC PC 670 Equipment Manual page 109

Release 04/02
Submenu "Video Adapter Settings"
Figure 5-15 Submenu "Video Adapter Settings"
Frame Buffer Size
AGP Rate
Default Primary Video
Adapter
Panel PC 670 Computing Unit, Equipment Manual
PhoenixBIOS Setup Utility
Advanced
Video Adapter Settings
Frame Buffer Size:
AGP Rate:
Default Primary Video Adapter:
Help Select Item
F1
ESC Exit Select Menu
[8] Specifies the size of the graphic memory used
[16] Onboard graphic card. This range is in the
[32] Main memory of the system.
[1x] Specifies the AGP transfer speed to the Onboard
[2x] graphic card
[4x].
[AGP] The Onboard video graphic card is used as a primary
display unit.
[PCI] A PCI graphic card may be used as a primary
display device.
This input is ignored if no additional graphic card is
inserted.
Configuring the Computing Unit in BIOS Setup
Item Specific Help
[8 MB]
On board video adapter
buffer size, which is sha-
[2x]
red with Main Memory
[AGP]
+ / – Change Values
Select
Enter Sub-Menu
F9 Setup Defaults
F10 Save and Exit
5-21