Siemens Panel PC 670 Equipment Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Touch Panel
  5. Panel PC 670
  6. Equipment manual
Siemens Panel PC 670 Equipment Manual

Siemens Panel PC 670 Equipment Manual

Operating unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

SIMATIC PC
Panel PC 670 / 870
Operating Unit
Equipment Manual
Edition 07/02
Preface, Table of Contents
Product Overview
Description of Device
Mounting
Maintenance
Remote Mount Form Factor
Appendices
Technical Data, Keyboard Table
ESD Guidelines
Index
1
2
3
4
5
A
B

Advertisement

Table of Contents
loading

Related Manuals for Siemens Panel PC 670

Summary of Contents for Siemens Panel PC 670

  • Page 1 Preface, Table of Contents Product Overview SIMATIC PC Description of Device Panel PC 670 / 870 Mounting Operating Unit Maintenance Equipment Manual Remote Mount Form Factor Appendices Technical Data, Keyboard Table ESD Guidelines Index Edition 07/02...
  • Page 2 The device may only be used for the application cases specified in the catalog and the technical description and may only be used in combination with third-party equipment and components recommended or approved by Siemens. Startup must not take place until it is established that the machine which is to accommodate this component is in conformity with the guideline 98/37 EC.
  • Page 3 Trademarks You will find the registered trademarks of Siemens AG in the preface. The remaining marks used in this publication (or on the CD) may be trademarks, the use of which by third parties for their own purposes could violate the rights of the owner.

  • Page 5: Preface

    The manual is supplied as an electronic document in PDF-format together with the SI- MATIC Panel PC 670 or PC 870 and has been written for the following readers: S users who commission the device themselves or work with the Panel PC...
  • Page 6 S SIMATIC Panel PC 670 Computing Unit Equipment Manual The manual is supplied on CD together with the SIMATIC Panel PC 670 as an electronic document in PDF-format. It is intended for the commissioning engineers, and service and maintenance technicians who install upgrades or perform error analyses on the computing unit.
  • Page 7 Preface History Edition Comments 03/00 Initial release of the equipment manual SIMATIC Panel PC 670 – Operating Unit. 07/01 Initial release of the equipment manual SIMATIC Panel PC 670/870 – Operating Unit. 12/01 Extension to include the ”remote mount form factor” option of the SI- MATIC Panel PC 670/870 –...
  • Page 8 GMT: –5:00 GMT: +8:00 The languages spoken by the SIMATIC Hotlines are generally German and English, the Authorization Hotline is also provided in French, Italian and Spanish. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual viii Edition 07/02...
  • Page 9 – in the Internet under http://www.siemens.com/automation/service&support Training Center Siemens offers a number of training courses to familiarize you with the SIMATIC S7 automation system. Please contact your regional training center or our central training center in D 90327 Nuremberg, Germany for details.
  • Page 10 Preface SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 11: Table Of Contents

    ..........2.4.1 Dimensions of Panel PC 670 in standard mount form factor ...
  • Page 12 ..............Index-1 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 13: Product Overview

    Product Overview Usage The SIMATIC Panel PC 670/870 is an industry-standard PC platform for demanding tasks in the field of PC-based automation. The Panel PC is de- signed for on-site use on the machine, installed for example in S 19” cabinets/racks, S Control cabinets and consoles, S Swivel arms (booms).

  • Page 14: Panel Pc 670: Computing And Operating Units

    Panel PC: Computing unit and operating unit Fig. 1-1 Brief description The SIMATIC Panel PC 670 can be supplied with various operating units, which differ by way of their display size and style of operation, which is ei- ther by membrane keyboard or touchscreen.
  • Page 15 19” screw fixing for 15.1” version _______________________________________________________ ) see Technical Data (Appendix) ) not for option “operating unit without front side USB interface” (see Technical Data in Appendix) SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 16: Panel Pc 870: Computing And Operating Units

    – 12.1” TFT screen; 800 x 600 pixel resolution – 15.1” TFT screen; 1024 x 768 pixel resolution S Membrane keyboard with alpha, numeric, cursor and control keypad SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 17 ) see Technical Data (Appendix) ) not for option “operating unit without front side USB interface” (see Technical Data in Appendix) ) available only in remote mount form factor SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 18 Product Overview SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 19: Description Of Device

    Touch PC 670 PC 870 – x *) PC 670 / 870 without front side – – – USB interface *) available only in remote mount form factor SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 20: Operating Units With Key-Based Front Panels

    The left LED (”POWER”) lights when the power supply works The right LED (”TEMP”) lights when a temperature threshold is excee- ded (see “SOM–program” in chapter 7 of the “Computing Unit” manual). SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 21: Keyboard

    Open help ALT key SHIFT Switch to enable entering Switch between of special characters using lower-case and the alpha and numeric keys upper-case letters Fig. 2-3 Control keys SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 22 The numeric keys are used to enter the digits ”0” to ”9”, various special characters, and the signs ”+” and ”–”, as well as hyphens (”–”) and decimal points “.“: Fig. 2-5 Numeric keys SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 23: Integrated Mouse

    The parameters can be modified under ”System Setting/Mouse”. If you wish, you can also connect an external mouse via the front USB (re- fer to Section 2.3). SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 24: Operating Units With Touchscreen Front Panels

    The left LED (”POWER”) lights when the power supply works The right LED (”TEMP”) lights when a temperature threshold is excee- ded (see “SOM–program” in chapter 7 of the “Computing Unit” manual). SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 25: Interfaces

    K2. Display cable K2 IO/USB cable K1 Fig. 2-8 Interfaces on the rear side of the operating unit SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 26: Interface Assignment

    Data–, USB channel 0 USB_P5V_fused + 5V (fused) for external USB inter- face; max. 100 mA, use an external power supply for devices requiring higher currents Signal type Bi-directional Output Voltage SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 27: Device Dimensions

    Description of Device Device dimensions The following pages specify the unit dimensions for the Panel PC 670/870 in a central installation position. The dimensions of the remote mount form factor you will find in chapter 5 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual...
  • Page 28 Fig. 2-9 Device dimensions Panel PC 670 in standard mount form factor without a CD–ROM drive The computing unit contains a CD–ROM or CD–RW/DVD drive, depending on the unit version. The installation depth of the computing unit is increased by 21 mm as a result of its installation.

  • Page 29: Dimensions Of Panel Pc 870 In Standard Mount Form Factor

    The computing unit contains a CD–ROM or CD–RW/DVD drive, depending on the unit version. The installation depth of the computing unit is increased by 21 mm as a result of its installation. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual 2-11 Edition 07/02...
  • Page 30 Description of Device SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual 2-12 Edition 07/02...

  • Page 31: Mounting

    Mounting Note The Panel PC 670/870 is permitted for indoor use only. The display should not be exposed to direct sun light or other strong light sources. High frequency radiation, e.g. by mobile telephone equipment, may cause abnormal operational situations.

  • Page 32: Mounting Cut-Out

    450 290 130 Fig. 3-1 Mounting cut-out for standard mounting of Panel PC 670 (width x height x depth in mm) When installing in an enclosed housing, ensure that there is sufficient vo- lume for air circulation and, if necessary, for swinging out the computing unit (see also Figure 2-9 and 4-1).
  • Page 33 (see also Figure 2-10 and 4-1). The maximum air intake temperature must not exceed 45°C. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 34: Installation

    (for dimensions, 15.1” TFT 450 290 81 465 235 16 10 — — see Fig. 3-1) Fig. 3-3 Dimensions for installation of the operating unit of Panel PC 670 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 35 Fix the operating unit at the drill holes using suitable screws and nuts. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 36 (keyboard version), 15.1” TFT 450 290 81 465 235 16 10 (for dimensions, see Fig. 3-2) Fig. 3-4 Dimensions for installation of the operating unit of Panel PC 870 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 37 5. Swing the computing unit to the operating unit and fix in position by tigh- tening the four knurled screws. Knurled screw Hinge Knurled screw Hinge Fig. 3-5 Joining the operating and computing units SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 38 Carefully knock out the drill hole covers on the front side of the opera- ting unit. Fix the operating unit at the drill holes using suitable screws and nuts. Continue as from step 3 for clamp fixing. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 39: Maintenance

    – for 12” keyboard version 6AV7671–3CA00–0AA0 – for 15” keyboard version 6AV7671–5CA00–0AA0 printing form pattern for labeling strips: purchasing opportunity by download from the customer support (see preface) SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 40: Detaching The Operating Unit In Standard Mount Form Factor From The Computing Unit

    Fig. 4-1 Swinging the computing unit away from the operating unit (viewed from above) You can now access the connections on the rear panel of the operating unit. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 41 (see Figure 3-3). Securing the Reinstall and swing the computing unit back into place in the reverse order computing unit to that described above. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 42: Panel Pc 870

    If necessary, you can now remove the operating unit by loosening either the screws or, depending on the version, the six clamps which secure the operating unit to the mounting panel (see Figure 3-3). SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 43 Rear side of operating panel with positions of interfaces Securing the Reinstall and swing the computing unit back into place in the reverse order computing unit to that described above (see also Section 3.2). SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 44: Replacing Soft Key Labeling

    Slits for vertical soft key labeling strips Slits for horizontal soft key labeling strips Fig. 4-5 Rear side of the operating unit with connections and slits for the soft key labeling strips SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 45: Remote Mount Form Factor

    The present document centers around the operating unit. The part of the description referring to the remote mount form factor of the computing unit will be found in ”Panel PC 670 Computing Unit” and ”Panel PC 870 Computing Unit” manuals.

  • Page 46: Overview

    The components required for the remote mount form factor are listed below. A com- ponent has to be selected from each of items 1 to 4 for a complete system. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 47 – 10 m – 20 m 4. Computing unit with transmitter: – Panel PC 670 remote – Panel PC 870 remote The order will be configured before leaving the works. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 48: Block Diagram

    120 – 240 V Power supply AC DC or DC DC 24 V 120 – 240 V or 24 V Fig. 5-2 Block diagram of central configuration SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 49: Description

    Fig. 5-3 Rear of operating unit with mounted receiver and direct key module The optional direct key module can be seen in the center of the figure. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 50: Dimensions

    354 310 Dimensions without screw protrusions Dimensions in mm Fig. 5-4 Dimensions of operating unit in a remote mount form factor with mounted receiver and direct key module SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 51: Mounting

    It results from D + 48,6 mm + 10 mm (10 mm additional space for ventilation). With a Panel PC 670/870 in remote mount form factor, the operating unit can be ope- rated in an inclined position of up to 70°.

  • Page 52: Cable Connection

    For spare parts relating to the remote mount form factor refer to Chapter 4. Technical specifications For the technical specifications relating to the remote mount form factor refer to Ap- pendix A. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 53 – permanently light green color dots: x 5 ) operating unit combined with computing unit ) mounting depth; equipped with CDROM drive: + 20 mm (+ 0.79 “) SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 54: Appendix A: Technical Data

    Warranty period 24 months ___________________________________________________________________ ) not for option “operating unit without front side USB interface” (see “Degree of protection”, version b.) ) indoor use only SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 55: Technical Specifications For Panel Pc Operating Unit With Remote Mount Form Factor

    Display 10.4” TFT 12.1” TFT 15.1” TFT 12.1” TFT 15.1” TFT touchscreen touchscreen PC 670, standard PC 670,remote – PC 870, standard – – PC 870, remote – SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 56: Keyboard Table (Operating Units With Key-Based Front Panels

    & 20/s 1e/s 38/s 27/s 26/s 40/s F19 (Shift F7) 11a1 ‘ 12a1 34/A ’ 13a1 ’ 14a1 34/s ” 15a1 16a1 3f/s F18 (Shift F6) 19a1 35/s SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 57 F17 (Shift F5) 27a1 22/s 28a1 22/A 29a1 21/s 30a1 33/s 31a1 32a1 3d/s F16 (Shift F4) 35a1 23/s 36a1 37/s > 37a1 36/s < 3c/s F15 (Shift F3) SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 58 3a/s F13 (Shift F1) (CURSOR UP) (PAGE UP) (PAGE DOWN) (INSERT) (ESC) (CURSOR RIGHT) (HOME) (CURSOR LEFT) (DELETE) 3a/a (ACK - ALT F1) (ENTER) (CURSOR DOWN) 0b/a (HELP) SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 59 <code value>/s : SHIFT is also transmitted <code value>/a : ALT is also transmitted <code value>/as : ALT+SHIFT is also transmitted <code value>/c : CTRL is also transmitted SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 60 Appendix A: Technical Data SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 61: Appendix B: Esd Guidelines

    Most plastics are capable of carrying high charges and it is therefore imperative that they be kept away from sensitive components! When handling electrostatic sensitive devices, make sure that persons, workplaces and packages are properly grounded! SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...
  • Page 62 With assemblies containing fitted batteries, make sure that the conductive packing does not come into contact with or short-circuit battery connectors. If necessary, cover the connectors beforehand with insulating tape or insulating material. SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Edition 07/02...

  • Page 63: Index

    B-1 mouse pointer direction, 2-5 EMC noise immunity, 2-7 mouse pointer speed, 2-5 ESD guidelines, B-1 external keyboard, 2-7 numeric keys, 2-4 function keys, 2-3 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Index-1 Edition 07/02...
  • Page 64 V AC, 5-5 USB, A-2 product overview, 1-1 front–side interface, 2-7, 2-8 protection class, A-2 warranty period, A-2 receiver, 5-5, 5-6, 5-8 weight, A-1, A-3 relative humidity, A-2 SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual Index-2 Edition 07/02...

This manual is also suitable for:

Panel pc 870

Table of Contents