Display Post Status; Display Trace And Assertion History - Siemens PSFR-CP41 Installing, Starting Up And Maintaining

Configuring the PSFR-CP41

Display POST Status

This option displays the results of the most recent power on self test (POST).
The POST test results are shown below.
Serial Port Loopback ............................ passed
Monitor-flash Checksum........................... passed
Program-store Main RAM .......................... passed
Trace Buffer in Main RAM ........................ passed
PCI Protocol RAM ................................ passed
SCSI Script RAM ................................. passed
Fibre-channel Port Single-frame Sequence Loopback .... passed
Fibre-channel Port Multi-frame Sequence Loopback ..... passed
Ethernet Port Loopback .......................... passed
SCSI Port Loopback .............................. passed
Press Any Key to Continue...

Display Trace and Assertion History

This option allows for internal trace state information to be dumped to the serial
port and captured. This is useful to debug installation issues, and can be
provided for failure analysis. Further information on using this interface can be
located in the troubleshooting section of this manual.
1) Display trace for current boot cycle
2) Display trace from previous boot cycle
3) Display trace from last assertion failure
4) Display history of assertion failures
5) Clear current trace buffer
X) Return to previous menu
U42093-J-Z716-1-74
Status of Power-on Self Test
Version: X.X XXXX
Trace Dump Menu
Version: X.X XXXX
Display POST Status
Operating Manual