Table of Contents
Advertisement
Mounting the PSFR-CP41 in a Rack
To reduce injury or equipment damage, the mounting brackets must be
!
level. If the brackets are not level, the PSFR-CP41 cannot be installed
correctly.
Operating Manual
Installing the PSFR-CP41
5. Locate the front of the mounting
brackets.
6. Attach the brackets to the front
mounting rails, using two screws on
each side. Be sure to use only the
top and bottom holes in each
bracket. (The middle holes will be
used to attach the front cover panel
after the unit is installed.) Tighten
the screws securely.
U42093-J-Z716-1-74
Advertisement
Table of Contents
