For Windows 2000; For Windows Xp - Siemens E-110 User Manual

For Windows 2000

1. From the Start menu, point to Programs > Accessories and then click Command Prompt.
2. Type ipconfig at prompt. Then you will see the IP information from DHCP server.
3. If you want to get a new IP address, type ipconfig /release to release the previous IP address and
then type ipconfig /renew to get a new one.

For Windows XP

1. From the Start menu, point to Programs > Accessories and then click Command Prompt.
2. Type ipconfig at prompt. Then you will see the IP information from DHCP server.
3. If you want to get a new IP address, type ipconfig/ release to release the previous IP address and
then type ipconfig/ renew to get a new one.
Rev:01_040220
Chapter 3: Configuration
31