For connecting through a hub, please refer to the following diagram for an example.
Install the USB Driver
For Windows ME
Run the USB installation program from the CD provided by your device package.
An InstallShield Wizard will appear. Please wait for a moment.
When the welcome screen appears, click Next for next step.
When the InstallShield Wizard Complete appears, click Finish.
Plug the USB cable between your device and PC.
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
The system will detect the USB driver automatically. Now, the system will copy the proper
files for this device.
When the file copying finished, the dialog above will close. Now the USB driver is installed
properly. You can use the device.
For Windows 2000
Run the USB installation program from the CD provided by your device package.
Chapter 3: Configuration
5