Siemens E-110 User Manual page 52

SIEMENS ADSL E-110_E-110-I user manual
The NAT Global Information
Field
TCP Idle Timeout(sec) For a NAT translation session on data that uses the TCP protocol, the
TCP Close Wait(sec)
TCP Def Timeout(sec)
UDP Timeout(sec)
ICMP Timeout(sec)
GRE Timeout(sec)
Default Nat Age(sec)
NAPT Port Start/End
2. If you change any values, click [Apply]. A page gives a receipt for the changes.
3. Select Admin > Commit & Reboot and click [Save] to save your changes to permanent storage.
46
table contains the following fields:
Description
translation will no longer be performed if no matching data packets are
received after the specified time has elapsed.
For a NAT translation on data using the TCP protocol, after a communication
session has been closed, the translation will no longer be performed if no
matching data packets are received after the specified time has elapsed.
For a NAT translation session on data that uses the TCP protocol, the
translation will no longer be performed if no matching data packets are
received after the specified time has elapsed.
Same as TCP Idle Timeout, but for UDP packets.
Same as TCP Idle Timeout, but for ICMP packets.
Same as TCP Idle Timeout, but for GRE packets.
For all other NAT translation sessions, the number of seconds after which a
translation session will no longer be valid.
When an napt rule is defined, the source ports will be translated to
sequential numbers in this range.
Rev:01_040220