Lock Functions On The Handset; Activating/Deactivating The Handset Lock - Siemens pocket 2011 Tango Operating Instructions Manual

Cordless digital dect telephone system expandable to 6 handsets
Table of Contents

Advertisement

18.7.99

Lock functions on the handset

Activating/deactivating the handset lock

. t Handset Lock
o
u
/
ON
OFF
DSS number for handset lock
KAP14.FM5
It is possible to lock both the entire Gigaset 2011 Tango
telephone and individual handsets against unauthorized
use. Depending on the type of lock you select, DSS or
emergency numbers can still be called from the handset.
You can lock your handset for outgoing external calls to
protect it against unauthorized use.
It is possible to accept calls on a locked handset.
t means: browse using x
(
t Lock on/off
When you select the handset lock you will be requested
to enter your PIN.
x
Enter the PIN (factory default "0000 ") and confirm.
OK
x
Switch the handset lock on or off by pressing the
OK
key and save.
ON
The message "Handset locked" is shown on the display.
If you have already entered a DSS number, this will be dis-
played.
or
x
{
Quit the menu without implementing any changes.
You can store one DSS number which can be dialed when
the handset is locked. The DSS number can be a number
where you can be reached in your absence.
The DSS number must not be the same as a
barred number.
The DSS number cannot be dialed from a locked
handset,
If the Gigaset 2011 Tango lock is activated, it is
only possible to dial emergency numbers.
Exception: DSS number = emergency number.
Gigaset 2011 Tango: A30852-X1106-B306-2-7619
Lock functions on the handset
confirm using u
Z
,
if "outward-restricted trunk access" is set
(
page 38), or
if the Gigaset 2011 Tango lock is activated
page 33.
)
OK
/
OFF
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset 2011 tango

Table of Contents