External Call-Waiting During Internal Calls; Ending A Call - Siemens pocket 2011 Tango Operating Instructions Manual

18.7.99

External call-waiting during internal calls

Ending a call

KAP05.FM5
If you are on an internal call with a second handset and a
external call arrives, this is indicated by the call-waiting
function. Your internal call is terminated when you accept
the external call.
The arrival of the external call is indicated as follows on
the display:
:
EXT.
u
You accept the call immediately.
TALK
or
a
Disconnect the internal call. You will hear the ring tone.
c
Accept the external call.
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a
Disconnect ("on-hook").
If the handset was in protected mode, it re-
mains in this mode after you press
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Incoming calls
INT.
2
TALK
RUF AUS
a
.
9