Table of Contents
Advertisement
18.7.99
Allowing internal parties to listen in on a call
Ending an internal call
Switching off the microphone (mute function)
KAP07.FM5
It is possible to enable an internal party to listen in on a
call with an external party from his/her handset.
c
An external connection is already set up.
x
[
Set up an internal connection.
1
6
Dial the internal party (1... 6). An external call is under way.
...
The internal party answers. Hold your conversation.
x
R
The external call is resumed and the internal party can lis-
SET
ten in.
Disconnect internal party again
x
R
The internal party is disconnected and hears the busy
SET
tone.
or
a
The internal party hangs up by pressing the on-hook key.
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a
Disconnect line ("on-hook").
It is possible to switch the microphone off during external
calls. This allows you to consult other people in the room
while the external party is on hold. The external party can-
not hear what you are saying and will hear music.
x
[
Set up an internal connection.
(
The microphone is switched off. Hold consultation with
people in the room. The external party will hear music.
R
Switch the microphone back on. You are reconnected
with the external party.
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Collective ringing and internal calls
15
Advertisement
Table of Contents
