Automatic External Callback; Activating Callback; Accepting A Callback; Deleting A Callback - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Convenient telephoning

Automatic external callback

Step
by
on busy – CCBS
step
If the called party is currently in a call you can initiate automatic callback. This
will save you having to dial again and again.
On no reply – CCNR
If the called party does not answer you can initiate automatic callback. As soon
as the other party is free again you will receive the callback. This feature must
be supported by the central office. The callback order will be automatically
cancelled after about two hours (depending on the central office).

Activating callback

To activate callback confirm the softkey [CALLBCK].
1.
Wait for confirmation from central office.
2.

Accepting a callback

The handset rings with a specific ring tone and the callback number is shown
on the display.
Press
1.

Deleting a callback

The handset rings and the callback number is shown on the display.
Confirm [DELETE]. The callback is deleted.
1.

Checking or deleting the callback number

Press
1.
Select using [
2.
The current callback number is shown on the display.
Confirm [BACK]. The callback remains active.
3.
or Confirm [DELETE]. The callback is deleted.
3.
56
E
: the connection is established.
*
for selection menus.
Z
Base Settings
] and [OK ]:
→ →
Status Callback
.